Upgrading OS from 2008r2 to 2012r2 Darren
Upgrading OS from 2008r2 to 2012r2 Synametrics Support
Upgrading OS from 2008r2 to 2012r2 Darren
Upgrading OS from 2008r2 to 2012r2 Synametrics Support
| From: | Darren |
|---|---|
| Date: | 1/23/20 10:28 AM |
| Topic: | Upgrading OS from 2008r2 to 2012r2 |
| Type: | General Discussions |
| Post a follow up | |
|
I have Xeams running on a 2008R2 server. That server version is end-of-life now. Is it possible to do an in-place upgrade to 2012R2 and Xeams still works properly? Thanks! |
|
| Top |
| From: | Synametrics Support |
|---|---|
| Date: | 1/23/20 10:34 AM |
| Topic: | Upgrading OS from 2008r2 to 2012r2 |
| Type: | General Discussions |
| Post a follow up | |
|
Yes. Check https://www.xeams.com/MoveXeams.htm for instructions. |
|
| Top |
| From: | Darren |
|---|---|
| Date: | 1/24/20 2:57 PM |
| Topic: | Upgrading OS from 2008r2 to 2012r2 |
| Type: | General Discussions |
| Post a follow up | |
|
It doesn't say much. Sounds like I will need to redo all my settings in the web interface?? Also, is it supported on Server 2016 or 2019? |
|
| Top |
| From: | Synametrics Support |
|---|---|
| Date: | 1/24/20 3:02 PM |
| Topic: | Upgrading OS from 2008r2 to 2012r2 |
| Type: | General Discussions |
| Post a follow up | |
|
No. You should not have to redo any thing. The most important part to confirm are file paths. Although many of the file paths in the config are relative to the $INSTALL_DIR, occasionally, you could have something that is absolute. For example, consider you were using D: previously but on the new machine it is E: drive. In that case, you will have to do a file replace. Yes. Xeams is supported on both Server 2016 as well as 2019. Contact our support via email if you run into problems after moving the files. |
|
| Top |